How to Unlock Pixl 8000 Vape

Quick answer: To unlock your Pixl 8000 vape, press the button on the base five times within two seconds. The screen will flash and the padlock symbol will disappear, indicating that your vape is unlocked and ready to use.

If you're yet to assemble and unlock your pod kit, read the next simple steps to get you started...

Step 1: Remove the Pixl 8000 Vape from its packaging

Once you've purchased your Pixl 8000 vape, open the box from the top and remove the contents.

The Pixl 8000 kit features a battery device, along with a 2ml pod and a 10ml refill cartridge prefilled with 20mg nic salt e-liquid. The pod is already inserted inside the battery and won't need to be separated.

Now that you've unpacked your kit, you're ready to assemble your device.

Step 2: Assemble your vape kit

To assemble your Pixl 8000 device, first peel off the sticker and remove the grey rubber plug from the refill cartridge.

Next, remove the plug from the pod, which is already fitted inside the battery device. Then insert the refill cartridge into the battery until it clicks into place. Make sure the cartridge is inserted upright with the metallic connection at the bottom, so it slots properly into the battery.

Finally, remove the rubber plug from your mouthpiece, then leave the kit for around thirty seconds to allow the pod coil to saturate.

Step 3: Unlock your Pixl 8000 Vape

With your device now fully assembled, it's time to unlock your vape kit. As the kit is already locked, you will need to follow this step to begin vaping.

The power button is located at the bottom of the device and is used to lock and unlock the kit or change the power settings. To unlock your kit, press the button five times quickly within two seconds. The screen will then flash and the padlock symbol will disappear, meaning it's now unlocked and ready to use.

Step 4: Start vaping

Your Pixl 8000 device is now assembled and unlocked, so you're ready to start vaping. The Pixl 8000 is inhale-activated, so simply take a draw from the mouthpiece to enjoy a rich and satisfying vape.

Conclusion - How to unlock Pixl 8000 Vape

Once you know where to find the power button and how it functions, unlocking the Pixl 8000 is a simple, straightforward process. So, if you find yourself wondering how to unlock a Pixl 8000 vape, simply press the power button at the bottom five times within two seconds. To lock your device again, follow the same process.

Need new pods for your kit? Check out our Pixl 8000 refill packs here.

FAQs

Have more questions on the Pixl 8000 and its functions? Check out our frequently asked questions below, which we hope will answer any further queries...

Why is my Pixl 8000 locked?

When you first use the Pixl 8000 kit, the device is automatically locked for security reasons. For existing users, this could be accidental activation caused by pressing the power button multiple times. You can easily unlock the Pixl 8000 by quickly pressing the power button on the bottom of the device five times within two seconds.

What does OP mean on the Pixl 8000?

The 'OP' displayed on your Pixl 8000 screen stands for 'overpuff protection'. This is a safety feature that protects the device and coil from burning out while preserving battery life. This usually appears if you've taken a puff for longer than ten seconds.

Why does my Pixl 8000 keep locking?

Most of the time this is due to accidental pressure on the power button when kept inside your pocket or bag. If the power button is mistakenly pressed five times in quick succession, the device will automatically lock. This can also sometimes be caused by a low battery, stopping the device from producing vapour. If you find this is happening when your battery's low, consider charging up the battery with a USB-C cable before unlocking.

What does the fire symbol mean on Pixl 8000?

The fire symbol shows that 'Boost Mode' is activated on your device. This produces a more intense hit of vapour and stronger flavour. You can deactivate this by double-clicking the power button on the bottom of your kit.

Can I use a Pixl 8000 while it's locked?

No, the Pixl 8000 won't produce any vapour while it's locked. The lock is designed to save the device from accidentally firing, while preserving battery life and protecting the coil from burning out.

How do I lock a Pixl 8000 vape again?

To lock the Pixl 8000 again, quickly press the button on the bottom of the device five times within two seconds. The LED screen will then flash with the padlock symbol reappearing.